SADT HTP 1700 hardness tester
HTP 1700 is an advanced state-of-the-art integrated palm sized metal hardness tester which incorporates the impact device and controller into one unit. Using patented “two coils” technology, SADT HTP 1700 gives extraordinarily high accuracy up to +/-2 HL and universal angle. There is no need to set... Read more »
SAMPLING ans SIEVING
Sampling Rotary Sample Dividers Sample division by our ROTARY SAMPLE DIVIDERS is more accurate than the other standard methods in use today. As more and more processes require exact sampling, make sure that you are using the most accurate method available. PT100 Table Top PK1000 Tube Divider... Read more »
Scanning Electron Microscope (SEM) Services
H&M utilizes two different types of Scanning Electron Microscopes, both equipped with Energy Dispersive Spectrometers (EDS) for chemical analysis. A fully equipped state-of-the-art Field Emission SEM (FESEM) permits us to tackle the most challenging material problems while a conventional SEM... Read more »
Scanning Electron Microscopy
Our Scanning Electron Microscope and Energy Dispersive X-Ray Spectrometer (SEM/EDS) can examine and analyze samples at magnifications from 5X to 200,000X. Both the microstructure and fracture surface are analyzed. Read more »
Scopes
Metlab offers a wide range of microscopes, including metallurgical, inverted metallurgical, stereoscopes, biological, and more. Read more »
Secotom-1
For manual cutting of PC Boards or sectioning of all other types of thin plates of materials which can be cut with a resin or metal-bonded diamond cut-off wheel. Large cutting table and easy to adjust guide rail allows for a variety of shapes and sizes of PC Boards to be sectioned. Read more »
Secotom-10
The most universal precision cut-off machine in the Struers line. Extreme flexibility from quality demanding to high throughput cutting jobs, and from very soft to very hard materials. High quality cutting of both small and large samples on one cut-off machine, including PCBs and other thin... Read more »
Sectioning Supplies/Equipment
Sectioning supplies and equipment, including abrasive cut-off wheels, cutting fluid, and abrasive cut-off machines. Read more »
Selection of Cut-off Wheels
If you know the material hardness, click on the graphic to the right to select a cut-off wheel no. The hardness (HV) is shown on the left. Find the hardness of the material, then move to the right until you cross the column with the correct wheel definition. Every wheel covers a certain... Read more »
SEM - Scanning Electron Microscopy
Scanning Electron Microscopy Our JEOL 820 scanning electron microscope (SEM) features a large chamber which can be accessed in vent-down mode for oversize components, and a small side-entry port for analysis of smaller samples. We also perform energy dispersive spectroscopy (EDS) analysis... Read more »
SEM Accessories
EDS Systems, EBL Add-ons, IR Chamber Scopes, Digital Imaging Systems, In-Situ Nanoindentation, Custom Holders, Nanomanipulators, etc. Read more »
SEM: Scanning Electron Microscopy
Scanning Electron Microscopy (SEM) aids in surface analysis by obtaining high-resolution, three-dimensional-like images of solid samples. The resulting image depicts Variations of a material's surface topography in levels of grey. Details as small as 70 angstroms can be resolved on most samples.... Read more »
SEMICONDUCTOR LITHOGRAPHY SYSTEMS
OAi is a global leader for over 35 years producing precsion lithography equipment for the Semiconductor Industry. Products range from table top mask aligners to automated mask aligners for production, UV light sources and edgebead exposure systems. OAI is also a global leader in Light Measurement... Read more »
Sensys Evo DSC
The SENSYS evo DSC offers the most precise DSC sensor with parameter independent calibration to give YOU a DSC system that not only has totally unmatched performance, it also can measure under pressure and reactive atmospheres without compromising your baseline or sensitivity. For the first time... Read more »
Series 9000 Total Hydrocarbon Analyzer
The Series 9000 analyzer provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The 9000 has a dynamic range from less than 10 ppb on the low range version and up to 100% as methane on the high range version. The analyzer has a... Read more »
Series 9100 Gas Chromatograph
This state of the art analyzer provides a multitude of features including lab quality analysis in an online fully integrated instrument. Multiple detector options including PID (Photoionization Detector), High Sensitivity PID, FID (Flame Ionization Detector) and TCD (Thermal Conductivity) allow... Read more »
Services Overview
Complete materials engineering services including failure analysis, corrosion control and prevention, API 579 fitness for service assessments, API 580 risk based inspection program development, laboratory chemical, mechanical and corrosion testing, API 653 storage tank assessments and material... Read more »
Servo Creep Systems
The Servo Creep Controller is designed as a substitute for dead weight stands, transforming them into a low cost automated load stroke or strain controller system. The controller interfaces with two of our load actuators for continuous loads up 5000 lb. and 10,000 lb. The actuators can be mounted... Read more »
Setsys Evolution DTA/DSC/T
Widest temperature range on the market (ambient to 2400°C). Modularity: interchangeable DTA, DSC, TGA and TMA modules can used with the same basic structure. Measurement performance: satisfying unique resolution, accuracy and sensitivity criteria. SETSYS Evolution is the state-of-the-art... Read more »
Shearography - Laser NDT
Rapid NDT of bonded structures. Read more »
Sheet - Special Purpose Metals and Alloys
If you need specialty metals or alloys sheet for electronics, magnetic, electrical, or other industrial applications, call Ed Fagan Inc. We stock a variety of sheet products in various metals and alloys in a range of sizes and conditions. Let them be your warehouse so you can cut back on your... Read more »
Sheet Stock
LAST-A-FOAM® is available in a variety of densities-from 5-50lb, standard and custom sheet sizes. Our specialist will match foam properties to consumer needs based on specifications and costs. Read more »
Short Beam Shear Test Fixture
ASTM D 2344 Read more »
SiC & Z/A Abrasive Discs
Designed for metallographic applications to coarse and fine grind a wide variety of materials. They feature superior mineral grading, a unique resin top coat, and a latex additive in the paper. This combination resists water penetration, creating a durable, long-lasting disc with uniform cutting... Read more »
SiC Foil
SiC Foil is based on a strong PET film that and due to its glossy surface it sticks safely to MD-Gekko. It can easily be removed and re-applied if not worn. Contrary to SiC Paper, the SiC Foil does not wrinkle or wrap when wet, it is completely stable and much stronger than traditional paper.... Read more »
Silicon Dioxide Membranes
These PELCO® membranes of Silicon Dioxide (SiO2) offer superior flatness. Using advanced MEMS manufacturing technologies combined with novel stress-reducing techniques, we have been able to provide Silicon Dioxide Support Films with unsurpassed flatness and a membrane thickness of 40nm, 18nm and... Read more »
Silicon Nitride Membranes
The PELCO® Silicon Nitride Support Films for TEM (also called Si3N4 TEM membranes) have been developed as an addition to our extensive range of TEM support films to further enable nanotechnology applications and extend molecular biology research. These superior products are made by state-of-the-art... Read more »
SimpleVIS® Portable Automated Kinematic Viscometer
For Direct Kinematic Viscosity of Transparent & Opague Liquids with Near ASTM D445 Precision ASTM D7279 Common Applications Product chain of custody monitoring Contamination checks Point of use testing Industrial lube blending Packaging & distribution of petroleum products Petroleum... Read more »
Simulated Service Testing
Research shows that a large number of service related failures are the result of fatigue or other mechanically induced causes. And you can avoid the unexpected catastrophe of premature failure by having your products or devices tested under a variety of simulated conditions. Read more »
Single Loop Temperature Controllers
Widest Range of Single Loop Temperature Controllers Available Read more »
Sliding rail kit
Even when using the extension arm, it is sometimes impossible to get the vertical clamping tool into a position allowing reliable clamping. With the sliding rail the range of a vertical clamping tool is extended by up to 145 mm. The sliding rail kit comes complete with a detachable 12 mm vertical... Read more »
Small Angle X-ray Scattering (SAXS) Products
Small-angle X-ray scattering (SAXS) is a small-angle scattering (SAS) technique where the elastic scattering of X-rays by a sample which has inhomogeneities in the nanometer range, is recorded at very low angles (typically 0.1 - 10°). This angular range contains information about the shape and size... Read more »
Soft Magnetic Alloys
Ed Fagan Inc. has a large inventory of Soft Magnetic Alloys. These alloys are easily magnetized and demagnetized. They are uniquely suited for specialized applications that require high permeability, low losses, and low residual magnetism. Only several alloy families meet these characteristics.... Read more »
Solenoids
Individually Customizable Solenoids for OEM Projects Solenoids have been one of our core competencies since the company was founded. Fast, strong, durable and real all-rounders. These properties characterize the actuators from EBE sensors + motion. The portfolio of solenoids includes: Linear... Read more »
Sonic Leak Detector
The Class Instrumentation Sonic Leak Detector is a low cost instrument that allows the rapid detection of pressurised gases escaping from any form of plant system. The ultrasound "noise" generated by a leak can be easily detected by the hand-held unit and the leak location rapidly and accurately... Read more »
Specialty Gases
On spec. All the time. If high-performance gases are required as part of your demanding application and analytical accuracy is key, Airgas can help. You can count on this during blending with the latest analytical equipment and techniques, in specialty gas labs where most are ISO 9001 registered,... Read more »
Specimen holders
Specimen holders for all shapes Struers offers a wide range of specimen holders for clamping of 3 or more mounted or unmounted specimens. All kinds of shapes of specimens can be clamped. Read more »
Specimen Machining
Laboratory Testing uses computerized numerical control (CNC) equipment to prepare the highest quality test specimens from metals including metal matrix composites, hardened steels and nickel-base alloys, and some plastics. EDM services also are available. Our test specimen machining is performed... Read more »
Specimen Mover Plates
For RotoForce-4 and Pedemat, for Accustop. For grinding of 3 specimens with Accustop Specimen Holder For clamping of 3 or more mounted or unmounted specimens. All kinds of shapes of specimens can be clamped. Read more »
Spectro Guide - Haze Meter
High quality “class A” surfaces are expected to have a clear and brilliant appearance. Micro structures can cause a milky appearance. This effect is described as milkiness or haze and is often caused by specific parameters in the production process like resin type, degree of dispersion or... Read more »
Spencer Impact Tester
The Spencer Impact Attachment was developed for use with Thwing-Albert's Elmendorf Tear Tester. It provides a convenient method for determining the impact resistance of plastic films and packaging materials under conditions that closely approximate the strain rates that the material is subject to... Read more »
Spring Testers
IST make a variety of spring testers, for both load testing and torque testing. Manual load test machines - manual machines are available with a maximum load from 10 to 500 N. Automatic load test machines - our automatic spring compression testers have a maximum load of between 10 and 50,000... Read more »
SRZ Modular System
The SRZ is a DIN rail mounted high-density modular system with a sample cycle time of 250ms and a 0.2% accuracy. Control method is selectable between position proportional control and cascade control in addition to heat only and heat/cool methods. A quick rise/drop to setpoint gives greater... Read more »
STA - Simultaneous TGA-DSC
The simultaneous application of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) to a single sample in an STA instrument yields more information than separate application in two different instruments: The test conditions are perfectly identical for the TG and DSC... Read more »
Stability Testing
CSZ provides stability testing, accelerated aging, shelf life testing, and package testing services. We offer a full range of temperature & humidity chambers that meet various test specifications including ASTM, ISTA, ICH Q1A and other test standards that involve temperature & humidity testing. Read more »
Standard Sensors and Accessories
Innerspec has created a line of high-power ultrasonic instruments, software, and EMAT & Specialty Sensors and Accessories to conduct a wide range of inspections using off-the-shelf components. Read more »
Static Materials Testing Machines From 0.2 kN to 2,500 kN
The Zwick materials testing machine concept includes three ranges for static materials testing, allowing the optimum testing machine to be provided for every requirement, with the best price/performance ratio. The ranges of our materials testing machines differ in configuration, equipment, features... Read more »
Sterilizing Ovens
Despatch offers a wide selection of high performance ovens for annealing. The portfolio of annealing ovens offers a variety of chamber sizes and temperature capabilities to best fir any customer’s application. These ovens feature exceptional temperature uniformity, flexibility and tight process... Read more »
Storage
Disc storage cabinet - dustproof Read more »
Strain gage installation service
At your design phase, HITEC as the strain gage transducer expertise to design an OEM transducer or custom load cell to fit your needs complemented by our production capabilities to build and stock your transducers to fit your medical equipment production needs. Transducers have been designed to... Read more »
